SP1
SP1
Description
Designed as a solution for carrying a pair of tin snips. the outer tool slots on the SP1 are perfectly sized for any brand snips (yes, Midwest snips fit). Additional storage is added with a main tool compartment large enough for wider hand tools or torpedo level. If you are an electrician and need to carry a voltage tester, leads, and a few hand tool essentials, you will find the SP1 is perfect for that job as well. The SP1 attaches to your belt or vest with Diamondback tri-fold hook and loop.
Guarantee
Width (inches): 4
Depth (inches): 4
Height (inches): 10
Weight (pounds): 0.4375
Frequently Asked Questions
Customer Reviews
I cut metal studs daily, framing, I need to check my level and plumb lines, this pouch gives me the space I need to carry left &right snips (Midwest), my level and other tools. I attached it directly to my pouch.
잠이 오지않을 정도로 설례를 지은 오늘드디어 모든 구성이 다 왔다
Perfect for throwing it on your side and doing some punch out work!!
👍🏻👍🏻👍🏻
It is smaller than I imagined it would be. That being said it's still meets my expectations 100%. I actually think I might like it more knowing it's not as big as I initially thought it was. Won't take up as much room on my vest or belt.
|
This Item
SP1
|
Hammer Holster
|
Gun Loop
|
Flat Bar Holster
|
|---|---|---|---|---|
| Pouch Type | Compact | N/A | N/A | N/A |
| Height x Width x Depth | 10 x 4 x 4 | 14 x 3 x 2.25 | 7 x 3 x 1.5 | 9.5 x 3 x 1 |
| Weight (LBs) | 0.4375 | 0.3 | 0.15 | 0.25 |
| Total Pockets | 1 | N/A | N/A | N/A |
| Internal Slots | 0 | N/A | N/A | N/A |
| External Slots | 5 | N/A | N/A | N/A |
| Tool Loops | 0 | N/A | N/A | N/A |
| Hammer Holster | Not Compatible | N/A | N/A | N/A |
| Flat Bar Holster | Not Compatible | N/A | N/A | N/A |
| Tape Pocket | No | N/A | N/A | N/A |
| 7" Square Slot | No | N/A | N/A | N/A |
| Mini Square Slot | No | N/A | N/A | N/A |
| Bit Index | No | N/A | N/A | N/A |
| Integrated Magnets | 0 | N/A | N/A | N/A |
| Attachment Points | 0 | N/A | N/A | N/A |
