Hi Volt Vest System
Hi Volt Vest System
Description
Configuration: Mini Niko (Right), Flux (Left), Hi Viz 701 Vest, Hammer Holster, 715 Chest Pocket
Great For: Electricians, HVAC
What Fits: Needle nose pliers, cutting pliers, meters, small speed square, torpedo level, laser distance measurer, tape measure, and screw drivers, electrical tape.
Just like the Standard Volt, but with our Hi Viz 701 Vest. The ultimate electrician's powerhouse system is here. Packing the mighty punch of the dominant side Mini Niko and its perfect partner - the Flux, The Hi Volt Vest System allows for full-scale, all-day productivity and comfort. Store as many tools as you like, in this minimal profile set-up. Take advantage of the quick release electrical tape loop on the Mini Niko and the big, open pockets of the Flux for quick tool draws and add an optional tape holster if you need it.
Sizing Note: The 701 Vest does not accommodate individuals taller than 6'5"
Guarantee
Width (inches): See component specs
Depth (inches): See component specs
Height (inches): See component specs
Weight (pounds): 3.5
- Rugged #10 zipper with large teeth
- 3M Reflective Strips on webbing
- Lightweight breathable vest mesh
- 8 Adjustment Points for the Perfect Finish
- Shock Absorbing Back
- Storage Loop
- Fall Protection Harness Compatible
- Optional Lumbar/Shoulder Pads for Added Support
This Item
Hi Volt Vest System
|
Dos Clavos 701 Vest System
|
Wright 701 Vest System
|
Artisan Vest System
|
|
---|---|---|---|---|
Pouch Type | Open | Compact | Slim | Slim |
Weight (LBs) | 3.5 | 4.2 | 4.3 | 4.9 |
Total Pockets | 4 | 5 | 3 | 6 |
Internal Slots | 6 + Divider | 0 | 4 + Divider | 6 + 1 Divider |
External Slots | 8 | 6 | 8 | 7 |
Tool Loops | 0 | 0 | 1 | 5 |
Hammer Holster | ||||
Flat Bar Holster | ||||
Tape Pocket | ||||
7" Square Slot | ||||
Mini Square Slot | ||||
Bit Index | ||||
Integrated Magnets | 0 | 3 | 2 | 0 |
Attachment Points | 12 | 8 | 11 | 8 |