Bossman
Bossman
Description
This extremely compact pouch is designed to carry the essentials. The single pocket is reinforced with an abrasion and scratch resistant Hypalon interior. The reinforced tool loop with hold your hammer and not scratch finished surfaces. We add a 4-slot bit index and stiff webbing for attaching tape or marker for good measure.
- Abrasion resistant 1000D Nylon exterior
- Hypalon-lined interior protects against sharp tool
- 4-slot bit index
- Reinforced 1000D Nylon hammer/tool loop won’t scratch finished surfaces
- Stiff webbing for hanging tape, long bits or markers
- Hook and Loop back attachment secures to Diamondback belt or pants belt
Guarantee
Width (inches): 4
Depth (inches): 4.25
Height (inches): 10
Weight (pounds): 0.35
- Hammer Loop
- SuperFabric Lining
- Drill bit bandolier
- Two tool clips
- Tape clip
Frame to finish carpenter here. Love this pouch for carrying the basics when we're at the stage when bigger pouches aren't really necessary. Great for the last stages of trim through the end of the project. Feels great on a regular pants belt and the weight is hardly noticeable. This holds a smaller hammer surprisingly well. When it's time to paint I can throw a rag in the hammer loop and putty knife and sandpaper in the main pouch. Pretty cool little tool pouch. It's pretty stiff and has needed some encouragement breaking in.
I ended up pairing it with the sole because I'm right handed and needed a small pouch on the right side.
The pouch is great for adding extra items to your setup. Quality built and works very well on my electrical setup.
Perfect fit
I purchased Diamondback belt, sack and Bossman a couple weeks ago. Bossman is perfect for my Makita pen impact drill, I love the hummer holder too.
I am very happy with all the gear, strong and comfortable. Cool design as well.
|
This Item
Bossman
|
Hammer Holster
|
Gun Loop
|
Flat Bar Holster
|
|---|---|---|---|---|
| Pouch Type | Compact | N/A | N/A | N/A |
| Height x Width x Depth | 10 x 4 x 4.25 (in.) | 14 x 3 x 2.25 (in.) | 7 x 3 x 1.5 (in.) | 9.5 x 3 x 1 (in.) |
| Weight (LBs) | 0.35 | 0.3 | 0.15 | 0.25 |
| Total Pockets | 1 | N/A | N/A | N/A |
| Internal Slots | 0 | N/A | N/A | N/A |
| External Slots | 0 | N/A | N/A | N/A |
| Tool Loops | 0 | N/A | N/A | N/A |
| Hammer Holster | Not Compatible | N/A | N/A | N/A |
| Flat Bar Holster | Not Compatible | N/A | N/A | N/A |
| Tape Pocket |
|
N/A | N/A | N/A |
| 7" Square Slot |
|
N/A | N/A | N/A |
| Mini Square Slot |
|
N/A | N/A | N/A |
| Bit Index |
|
N/A | N/A | N/A |
| Integrated Magnets | 0 | N/A | N/A | N/A |
| Attachment Points | 2 | N/A | N/A | N/A |
